JeHla - Podlahové centrum

These sheets of transparent, translucent or opaque material made from polyester applied in residential and industrial construction for houses, sports halls and traffic engineering in garden architecture. We use it primarily for pergolas, conservatories, balconies, porches, fences, roofs all over the area illuminated, greenhouses, railing panels, dividing walls, partitions, wall facades, cooling towers of power stations, noise barriers, road tunnels, public transport stops, …

High impact strength – even in extremely low temperatures, the boards maintain their high impact resistance.

Homogeneity - non-fibrous structure of boards creates a highly smooth surface, which prevents dust and dirt and provides strong resistance to frost.

The possibility of bending - due to the production of these boards can be safely bent. Minimum bend radius length is determined according to the profile plate.

UV protection - The boards are equipped with a coextruded layer of UV. The PVC panels that control is double-sided, with only one-sided PC boards. Protective coating reliably protects the boards against UV rays and ensures the stability properties when exposed to sunlight and weather effects.

Resistance to chemicals – The boards are also characterized by a natural resistance to aggressive chemicals, alkalis and acids, but not to solvents. Are also protected against the establishment of mosses, lichens, fungi and microorganisms.

They are made of hard PVC and PC, is used in the manufacture of technology co-extruded UV protection, which ensures resistance to UV radiation and thereby extending the shelf life stability of plates and mechanical properties. Plates are produced in the profiles, which reflected the shape aspect construction materials for roofs and cladding. Thanks to its low weight plates are conveniently applied in the design of the structure.

Transparent and translucent panels can be stored or transported when exposed to sunlight - is a danger of ignition principle lens. Store is horizontally separated from the equal base (eg, prisms), in the shade and covered over with a light-proof light sails. Must be prevented from bulging from the heat and humidity. Do not place on heated surfaces such as roofs, loading area for lorries. Underlay wooden bases.

is primarily used in the construction industry as glazing and translucent elements in residential, industrial and other buildings and facilities.

Boards excel thermal insulation properties, high impact resistance, very good optical properties, low weight, resistance to degrading influence of direct sunlight, cold bend options, high chemical resistance, good sound attenuation and simple workability. They are also equipped with a coextruded layer of protection against UV - radiation, which ensures their longevity.

Boards are suitable for industrial roofs and skylights, roof stadiums (petrol stations, car parks, bus stops public transport, sports facilities, swimming pools, arcades, ...), the roof before entering buildings, glazing of greenhouses and conservatories, windows of public buildings (schools, theaters , train stations, subways, passages), ceilings, partitions, ceiling lights.

Always install the polycarbonate panels so that the side with UV protection on the exterior side of a cavity longitudinally into the slope. Cavities are usually dust-you paste or tape leaving polycarbonate or aluminum locking profiles. When using mounting screws using screws with rubber washers and the drill holes with a tolerance with regard to the expansion boards.

Protective film of polycarbonate panels removed immediately after installation of the boards. More information can be found in the publication manual assembly. Polycarbonate panels with high impact resistance ensure high security - are noncomminuted.

Characteristics of the plates can be used at temperatures from -40 °C - +120 °C. They are also resistant to chemical cleaners.

Fire technical properties of hollow polycarbonate panels are certified by accredited testing laboratories TZÚS Praha, s. p. and PAVUS a. s. .

Polycarbonate sheets, cold bend lose their mechanical properties. When bending is necessary to observe the prescribed minimum bend radius. Polycarbonate is a plastic, therefore it is necessary to take into account the expansion plates - up to 3 mm per meter in all directions.